Jewellery Materials Guide
A clear guide to our materials.
Material Information for
Titanium
The titanium used in our jewellery is commercially pure and more than 99 percent titanium. It is supplied in the grade commonly referred to as Grade 2, which provides a stable structure and an even grey colour suitable for rings worn daily.
Titanium has a natural mid grey tone. It is lighter in appearance than blackened metals and darker than silver. The colour works well with polished, brushed and textured finishes.
Titanium is the lightest metal in our range. It is around four to five times lighter than tantalum, which is our heaviest metal, and noticeably lighter than silver, gold or cobalt chrome. A titanium ring of the same size will feel much lighter on the finger, which is one of the reasons customers choose it for everyday wear.
Titanium rings cannot be resized in the way softer metals can. The structure of commercially pure titanium does not allow stretching or reducing without specialist industrial machinery. For most customers it is more cost effective to purchase a new ring in the correct size, due to the lower price of titanium compared with precious metals.
Titanium can be engraved using a laser. Laser engraving produces a clean and accurate result, and when carried out by a skilled engraver it can show a clear black contrast against the grey metal. Shallow or poorly executed engraving may appear brown, so the quality of the engraving makes a difference. A range of options can be viewed on our titanium rings page.
Titanium is widely used for people with metal sensitivities and contains no nickel or common irritants. It is also used in medical implants such as plates and hip replacements, which demonstrates its suitability for long term skin contact. Many customers choose styles from our titanium rings category for this reason.
Titanium can be polished, brushed, hammered or given a bark pattern. Each finish provides a different appearance while keeping the same natural grey tone. These finishes are widely used across modern titanium designs.
The underlying grey colour remains stable. Polished and brushed surfaces will pick up marking in wear, and the metal will settle into a natural patina that reflects its use. Titanium does not yellow or darken.
Yes. Titanium will show scratches in normal use. Both polished and brushed styles show marking, although the marks appear differently on each finish. Scratches often show as fine polished lines across the surface. This is normal behaviour for titanium.
Yes. Titanium rings can be removed using standard emergency ring cutting tools. The most reliable approach is to make two cuts on opposite sides so the ring separates cleanly. Titanium is too strong to cut once and then bend open in the way precious metals are opened.
Titanium does not crack, break, squash or shatter in normal wear. It holds its shape well under everyday conditions. Like all metals it can be damaged under significant force, but this is not typical in daily use.
Titanium is suitable for rings worn daily. It is lightweight, skin friendly and comfortable to wear. It will mark and scratch with use, which is normal for this type of metal. Customers who prefer this feel and appearance often choose from our titanium rings category.
Material Information for
Tantalum
Tantalum used for jewellery is a highly stable metal refined to give a consistent dark grey tone. It is known for its strength, density and resistance to corrosion. The metal is worked in solid form rather than layers or coatings, and the colour runs throughout the ring.
Tantalum has a natural mid to dark grey colour with a smooth, even appearance. It is darker than titanium and lighter than blackened metals, giving it a distinctive tone that stands out without being overly sharp. The colour is consistent throughout the metal and does not rely on plating.
Tantalum is the heaviest metal in our range. A ring of the same width will feel noticeably heavier than titanium, cobalt chrome or tungsten carbide. The weight gives it a very solid feel and is often chosen by men who prefer a ring with more presence on the finger.
Tantalum rings cannot be resized in the way softer metals can. The metal is too strong to stretch or reduce without specialist machinery. Customers who need a different size usually choose a new ring rather than attempting a resize.
Yes. Tantalum engraves very well. Laser engraving produces a clear dark black contrast that stands out cleanly against the grey metal. The engraving remains sharp on polished, brushed and hammered finishes. You can view suitable styles within our tantalum rings category.
Tantalum is an inert metal and is considered suitable for sensitive skin. It is free from common irritants and reactions are unusual. Customers who prefer skin friendly metals often choose designs from our tantalum rings section.
Tantalum is available in polished, brushed and mixed finishes, as well as hammered versions. The hammered finish creates a textured surface with a more rugged look, while polished and brushed styles offer smoother and cleaner appearances.
The colour of tantalum stays stable in wear. The surface finish can look more matte over time, especially on polished rings, but the underlying tone does not yellow or darken. Brushed and hammered styles tend to keep a consistent appearance.
Yes. Tantalum will show scratches and marks in normal use. The marking is comparable to what you would see on a gold ring. These marks are a natural result of daily wear and contribute to the patina that tantalum develops over time.
Yes. Tantalum rings can be removed safely with a standard ring cutter. Many rings can be taken off with a single cut, while thicker or wider designs may need a second cut on the opposite side so the ring opens cleanly. Tantalum is easier to cut in an emergency than cobalt chrome, which can be slower to cut, and tungsten carbide, which is not cut at all but cracked away using a different method.
Tantalum is extremely tough and performs well under normal wear. It does not shatter or crack in daily use and is resistant to bending. In situations involving extreme force it will deform rather than break, which is one of the reasons it is chosen for long term durability.
Tantalum is chosen for its dark grey colour, substantial weight and strong performance in daily wear. It offers a rare and modern alternative to traditional precious metals and is available in polished, brushed and hammered finishes. It is also suitable for hand set diamonds, giving additional design options. Many customers looking for a distinctive and durable metal choose styles from our tantalum rings collection.
Material Information for
Cobalt Chrome
Cobalt chrome is an alloy made from around seventy percent cobalt and thirty percent chromium. This combination creates a bright white metal with high wear resistance and good stability in daily use. It is the same type of alloy used for certain medical implants and surgical tools because of its strength and corrosion resistance.
Cobalt chrome has a natural bright white tone. It is similar in appearance to white gold after rhodium plating and close to the colour of platinum. Unlike plated metals, cobalt chrome keeps this white colour without additional treatments. The surface finish may dull slightly in wear, but the underlying colour remains stable.
Cobalt chrome has a weight similar to stainless steel. It feels heavier on the finger than titanium and lighter than tungsten carbide. The weight gives it a solid and balanced feel without being as heavy as the densest metals in our range.
Cobalt chrome rings cannot be resized in the same way as softer precious metals. The alloy is too hard to stretch or reduce without specialist equipment. Customers who need a different size usually choose a new ring rather than attempting a resize.
Yes. Cobalt chrome engraves cleanly with a laser. The finished engraving can appear light, grey or black depending on the heat and depth used during the process. You can view suitable styles within our cobalt rings section.
Cobalt chrome is considered skin friendly and is used for medical applications that require long term skin contact. It contains no common irritants and reactions are unusual. Many customers with sensitive skin choose designs from our cobalt rings category.
Cobalt chrome does not tarnish. The alloy is naturally resistant to corrosion and keeps its white appearance. The polished surface may dull slightly with wear, but it does not require replating or special treatments to maintain its colour.
The bright white colour remains stable. The finish may appear more matte after regular wear, especially on polished rings, but the underlying colour will not yellow or darken. Brushed finishes usually keep an even appearance.
Cobalt chrome resists marking better than softer metals, although scratches are still possible. Any marks tend to be light and shallow. The metal holds its surface well in daily use and does not show rapid wear.
Yes. Cobalt chrome can be removed safely, although it is harder than precious metals and cuts more slowly with standard ring cutters. A diamond impregnated cutting disc is usually the quickest method. Most removals involve two opposite cuts so the ring separates cleanly.
Cobalt chrome is one of the strongest metals we offer for wedding rings. It holds its shape well in normal wear and does not bend out of round. We have never seen a cobalt ring break, shatter or crack through everyday use. As with any metal, extreme force can cause damage, but such cases are unusual and not something encountered in regular wear.
Cobalt chrome is chosen for its bright white appearance, balanced weight and strong performance in daily wear. It keeps its colour without replating, feels more substantial than titanium and remains lighter than tungsten carbide. Many customers looking for a modern and durable white metal choose options from our cobalt rings collection.
Material Information for
Tungsten Carbide
Tungsten carbide is formed by combining tungsten and carbon with a nickel binder. The nickel content is within EU nickel directives and is suitable for jewellery worn against the skin. The material is produced as a hard and stable metal that holds its shape well in daily use.
Tungsten carbide has a natural gunmetal grey tone. It is darker than titanium and lighter than blackened metals. The colour is consistent across the surface and works well with both polished and brushed finishes.
Tungsten carbide is the second heaviest metal in our range after tantalum. A ring of the same size will feel much heavier than titanium, silver or cobalt chrome. The weight gives it a solid and substantial feel on the finger.
Tungsten carbide cannot be resized. The metal is too hard to stretch or reduce without fracturing. Customers who require a different size usually choose a new ring rather than attempting a resize.
Yes. Tungsten carbide takes laser engraving very well and produces a clear black contrast across the grey metal. The engraving remains sharp on both polished and brushed surfaces. You can view suitable styles in the tungsten rings category.
Tungsten carbide contains a nickel binder, but the level is within EU nickel guidelines and is suitable for most skin types. Reactions are uncommon, and the inner surface remains smooth and stable in wear. Customers looking for nickel-compliant rings can view options on the tungsten rings page.
Plain tungsten wedding rings are made in three main profiles. The traditional court style has a rounded outside and a slightly rounded inside, giving a familiar shape that sits comfortably on the finger. Our comfort fit design, sometimes called flat court, has a rounded inside and a gently rounded outside, creating a modern look with a smooth fit. Our blended court tungsten wedding rings have a more rounded inside than a standard court while keeping a rounded outside. To maintain balance across the range, the depth increases with the width, starting at around 1.8mm in ladies 3mm widths and reaching around 2.4mm in men’s 10mm widths.
The underlying gunmetal grey stays stable. Polished surfaces can dull slightly with wear, and brushed styles may settle into a more even patina. Exposure to strong cleaning chemicals such as bleach or chlorine may dull the polished surface.
Tungsten carbide is difficult to scratch or mark in normal use, although marks are still possible. The hardness of the metal means the surface keeps its appearance well, but it is not scratch proof. Any marks that do appear tend to be fine and shallow.
Yes. Tungsten carbide can be removed safely, although it is too hard to cut with standard jewellery cutters. The most effective method is to place the ring on a hard metal block and tap it with a heavy item such as a hammer. Around twenty medium strikes, turning the ring between each impact, will stress the metal until it weakens and cracks away cleanly. This method is routinely used by emergency teams when a tungsten carbide ring needs to be removed.
Most tungsten carbide rings are worn without incident. Although the metal can crack, chip or break under an extreme impact, the number of cases we see is very low. If a ring breaks within the guarantee period and the damage is classed as accidental, we will replace it like for like free of charge on a one time basis. Tungsten carbide remains a popular choice for customers who prefer a heavy and stable metal for daily wear.
Tungsten carbide is suitable for daily wear. It is heavy, stable in colour and keeps a clean appearance in regular use. It should be removed during activities that involve heavy impact, gym work or DIY, as these environments can place excessive force on the ring. Customers who prefer the solid feel of a heavier metal often choose from the tungsten rings category.
Tungsten carbide wedding rings are produced using a nickel binder, but the level of nickel released is within EU nickel directive limits. The alloy is stable and the nickel is tightly bound within the metal, so it does not come into contact with the skin in the same way that nickel-plated jewellery can. Most people, including those who react to nickel in other forms, wear tungsten rings without any issues.
Material Information for
Zirconium
Zirconium used for jewellery is a pure metal that is refined for strength, stability and corrosion resistance. It has a natural grey colour and is worked in solid form, with no coatings or layered construction. Once shaped, the metal can be heat treated to create the black surface used in many modern designs.
Black zirconium is created by heating the metal to a very high temperature until the surface changes into a hard black oxide layer. Zirconium can ignite at extreme temperatures, so the process is carried out under controlled conditions. The black layer is part of the metal itself and is not a paint or coating.
Zirconium is slightly heavier than titanium but still feels light on the finger. It sits between titanium and stainless steel in weight, giving a solid but comfortable feel that many people find easy to wear.
Zirconium rings cannot be resized. The heat treated black surface cannot be stretched or reduced without damage, and the metal itself cannot be altered in the way softer precious metals can. If a different size is needed, the ring is usually replaced.
Yes. Zirconium can be laser engraved. Depending on how the surface reacts to the heat, the engraving may break through to a lighter grey or re-blacken and appear as black on black. Most engravings appear black, but the colour cannot be controlled exactly. Dual colour designs with natural grey sections can give clearer engraved results
Zirconium is generally considered suitable for sensitive skin. The metal is stable, inert and free from common irritants. Many customers with skin concerns choose designs from our zirconium rings category.
Black zirconium rings are available in polished and brushed finishes, as well as dual colour designs that show both the natural grey zirconium and the black outer surface. One style uses a brushed natural grey centre band with black edges, and engraving stands out clearly on the grey section. Dual colour rings offer contrast while keeping the durability of black zirconium.
The black colour does not fade or wash off. The black layer is a permanent part of the metal. Over time the surface can look more matte, especially on polished rings, and any scratches may show lighter grey marks where the natural metal sits beneath the black layer. This is a normal part of wear.
Yes. Black zirconium can show marks in everyday use. The black oxide layer is harder than the natural grey zirconium underneath, so it marks more slowly. The lighter grey areas can show scratches more easily. This is normal for the material and becomes part of the ring’s patina over time.
Yes. Zirconium rings can be cut off with a normal ring cutter. The first cuts may be slow as the cutter works through the hardened black surface, but the natural grey metal underneath cuts more easily. A diamond impregnated cutting disc can speed the process, although it is not essential.
Zirconium is strong in everyday use and holds its shape well. It does not shatter like tungsten carbide. Under extreme force it will deform rather than break. It remains stable in normal wear and is not known for cracking.
Zirconium is chosen for its modern appearance, light weight and permanent black colour. The metal is comfortable to wear, available in polished, brushed and dual colour designs, and suitable for subtle laser engraving. It offers a contemporary alternative to traditional metals and is one of the most popular choices for customers looking for a durable black ring. Many customers choose styles from our black rings category.
Zirconium rings are a good choice for customers who want a modern black wedding ring with a stable colour. When the metal is heat treated it forms a hard black surface that becomes part of the ring rather than a coating. This means the colour does not peel away and holds well in normal wear. The metal is comfortable to wear, does not contain common irritants and has a similar feel on the hand to titanium. Many customers choose styles from our black zirconium rings range when they want a dark design with a smooth, even finish.
Material Information for
Zirconia Ceramic
Zirconia ceramic is a high performance technical ceramic made from zirconium oxide. It is formed under high pressure and fired at very high temperatures to create a dense, hard material. The colour runs through the entire ring and is not applied as a surface coating.
Zirconia ceramic is strong, stable in wear and offers a deep black colour that remains consistent over time. The material is comfortable to wear, resistant to everyday marking and provides a modern alternative to traditional metals. Its solid black appearance is one of the main reasons customers choose it.
Zirconia ceramic is heavier than titanium but lighter than tungsten carbide. It has a balanced feel on the finger and sits in the middle of the weight range of the metals we offer.
Zirconia ceramic behaves like other ceramics and can break under a strong impact. Breaks are uncommon in everyday wear and cases we see are very rare. The material does not bend, so a severe force will cause a break rather than a deformation.
Zirconia ceramic cannot be engraved with a reliable and consistent finish, so we do not offer engraving on these rings. Most customers who prefer a black ring with engraving choose other materials where the engraving contrast is more predictable.
Yes. Zirconia ceramic is inert, stable and free from common skin irritants. For customers with sensitive skin who want a black wedding ring, zirconia ceramic is a natural choice as the material remains consistently black without coatings or surface treatments.
Zirconia ceramic rings are produced in a solid black colour with a polished or matte surface depending on the design. Because the colour runs through the material, both polished and matte styles stay black throughout wear.
No. The black colour is part of the ceramic itself and does not fade, wash off or wear back to another colour. The surface may look more matte over time, which is normal for this material, but the colour remains consistently black.
Zirconia ceramic is very resistant to surface marking. Like any material, it can show signs of contact with hard surfaces, but it performs better than most metals in everyday conditions. Any marks that do appear tend to be light and are not usually noticeable in wear.
Yes. Zirconia ceramic rings can be removed safely, although they cannot be cut in the same way as metal rings. Emergency teams typically crack the ring using controlled pressure. This is a standard procedure for ceramic materials and does not pose additional risk to the wearer.
Zirconia ceramic is the best option for a black wedding ring because the colour runs through the entire material and is not a coating. Black tungsten and black titanium rely on plated or surface treated finishes that can wear back to grey over time, while zirconia ceramic stays a consistent black throughout wear.
Zirconia ceramic offers a deep black colour, a modern look and good performance in daily wear. The colour is permanent, the material is comfortable on the finger and it resists everyday marking well. Many customers looking for a durable black wedding ring choose designs from our black rings category.
Material Information for
Damascus Steel
Â
The Damascus steel used for jewellery is made from layers of stainless steels, typically 304L and 316L. These steels are welded and folded together to form a patterned billet. The result is a strong and stable metal suitable for everyday wear.
Modern Damascus steel is produced through pattern welding. Layers of 304L and 316L stainless steel are forged, folded and bonded together, then shaped into the ring. Once the ring has been machined and polished, it is placed in an acid bath. The acid reacts more quickly with 304L than 316L, revealing the distinctive layered pattern. This technique creates a visual effect similar to traditional Damascus, but in a stainless form suitable for skin contact.
Damascus steel has a weight similar to stainless steel and feels heavier than titanium. It offers a balanced feel on the finger without being as heavy as metals like tantalum. Most customers describe the weight as solid and comfortable.
Damascus steel rings cannot be resized. The layered construction and strength of the metal prevent reliable stretching or reducing. If a different size is required, the ring is usually replaced rather than altered.
Yes, Damascus steel can be engraved, although the result varies across the layers. Where the engraving crosses darker and lighter sections, the contrast and clarity can change. It is suitable if you simply want the engraving present, but it is not the best choice when a crisp and highly legible engraving is required. You can view available styles within our Damascus steel rings page.
The Damascus steel used for jewellery is made from 304L and 316L stainless steels, both of which are generally suitable for sensitive skin. These steels are widely used for watch cases and other body-contact items. Customers who prefer skin friendly materials often choose designs from our Damascus rings category.
Our natural Damascus rings show the pattern created by the layers of 304L and 316L, with a wood-grain effect that varies with each ring. The woodgrain Damascus steel ring is the clearest example of the natural pattern. We also offer black Damascus styles finished with a vapour-deposited coating, giving a strong contrast between the layered texture and the darker surface. High carbon black Damascus is not used for jewellery in the UK as it does not meet the requirements for skin contact materials.
Damascus steel made from 304L and 316L does not rust in everyday wear. These grades are stainless steels and remain stable in normal conditions. We have not seen rust develop on our Damascus rings in use.
Yes. Damascus steel can show surface marks from regular use, similar to other stainless steel jewellery. The layered pattern makes marks less visible than on smooth polished rings, and brushed patterns tend to hide everyday wear well.
Yes. Damascus steel rings can be cut off with a standard ring cutter. The metal behaves like other stainless steels and does not crack or shatter. Most removals need one cut, although wider rings may need a second cut on the opposite side so the ring opens cleanly.
Damascus steel is strong in daily wear. It does not shatter or crack like tungsten carbide and is more resistant to bending than softer metals. In situations involving extreme force it will deform rather than break.
Damascus steel is chosen for its distinctive layered pattern, modern appearance and solid feel. Each ring shows a unique grain created during forging, so no two pieces are identical. The metal performs well in daily wear and is available in natural and vapour-deposited black finishes. Many customers looking for something different from traditional precious metals choose styles from our Damascus rings collection.
Material Information for
Sterling Silver Wedding Rings
Sterling silver wedding rings are made from 925 parts per 1000 pure silver, which is the same as 92.5%. The remaining metal strengthens the alloy because pure silver is too soft to wear on its own. We use recycled sterling silver sourced from a major European bullion supplier, and every ring is produced to the recognised 925 standard used throughout the UK jewellery industry.
Yes. All of our silver wedding rings are made in the UK and are hallmarked at either the London or Birmingham Assay Office. Every ring is hallmarked regardless of weight, confirming the metal purity of 925 parts per 1000 and showing the ring meets UK hallmarking law.
Our silver wedding rings are lathe spun rather than cast. Spinning compresses the silver, creating a denser structure with fewer internal air pockets. Cast rings can contain small bubbles that increase the chance of breaks. Spun rings take longer to make but give a more reliable finished product. Each ring is then sized, hand finished and polished in our own workshop.
We offer court, flat court, flat and D-shape profiles. Court and flat court rings resist bending better than flat designs because of their rounded structure. D-shape sits between them in behaviour. None are immune to bending, and the final strength is influenced by the width and weight of the ring.
Yes. Silver is one of the softer jewellery metals and will show marks from the first wear. This is normal and expected. Over time the fine scratches settle into a natural matte patina that is characteristic of well worn silver. These marks do not affect the strength or integrity of the ring.
Yes. Silver reacts with oxygen and small amounts of sulphur in the air, which can cause it to turn yellow, grey or black if left unworn. Tarnish is a normal surface reaction and does not indicate a fault. Rings worn daily tend to tarnish less because they polish themselves against clothing. Tarnish can be removed with a suitable silver cleaner or polishing cloth.
Silver is softer than most alternative metals, so the risk depends on the profile and width. Wider rings, especially in court or flat court profiles, are less likely to bend in normal wear. Finer widths, such as 2mm, can bend more easily due to their lighter structure. Breaks are uncommon in spun rings because the metal is denser and free from casting bubbles.
Yes. Silver engraves cleanly and the engraving may appear natural or dark depending on the heat of the process. We engrave on the inside of the ring only, as engraving on the outside can wear down over time due to the softer nature of silver.
Yes. Silver rings can usually be stretched or reduced slightly, and larger changes can be made by cutting the ring and adding or removing silver. Any resizing should be carried out by a competent jeweller. Resizing may affect the engraving if the ring already has text inside.
Yes. A silver wedding ring can be removed quickly and safely using a standard ring cutter, as the metal cuts easily and does not require specialist tools. Once removed, the ring can usually be repaired and resized by a competent jeweller. Cutting a silver ring for emergency removal does not prevent it from being restored afterwards.
Often yes. Because silver can be produced in a wide range of widths and profiles, many couples can choose matching or complementary styles. Court and flat court designs are especially flexible for creating matching pairs.
Silver offers a bright white colour, a traditional appearance and the reassurance of UK hallmarking. It is comfortable to wear, easy to engrave on the inside and finished to a high polish in our workshop. Many customers choose designs from our silver wedding rings collection, and those who prefer rounded profiles often select from our silver court wedding rings range.
Material Information for
Sterling Silver Jewellery
Sterling silver is an alloy containing 925 parts per 1000 pure silver, which is the same as 92.5%. The remaining metal is added to increase strength because pure silver is too soft to wear on its own. The alloy keeps the familiar bright white colour of silver while improving durability for everyday use. This 925 standard is recognised across the UK jewellery industry and is used for all of our silver pieces.
Yes. Our silver jewellery is made for us in Thailand and is hallmarked in the UK in accordance with UK law. Any individual item above 7.78 g receives a full hallmark confirming the metal purity. Sterling silver is defined as 925 parts per 1000 pure silver, which is where the number 925 comes from. This measure is used across the jewellery industry because it provides a consistent way of identifying silver that is 92.5% pure. The 7.78 g hallmarking limit applies per earring, per cufflink or per single piece, not per pair. Items below this weight are stamped 925.
UK hallmarking law only requires a full hallmark when a silver item exceeds 7.78 g. Lighter pieces such as pendants, earrings and small charms fall below this threshold. These items carry a 925 stamp to confirm the metal purity. A full hallmark and a 925 stamp both indicate the same 92.5% silver content. The difference relates only to weight requirements in UK law.
Yes. Silver reacts with oxygen and small amounts of sulphur in the air, which can cause the surface to turn yellow, grey or eventually black if left unworn. Tarnish is a normal chemical reaction and does not indicate a fault. Pieces worn regularly tend to stay brighter because the surfaces polish themselves against clothing. Tarnish can be removed with a polishing cloth or suitable silver cleaner and will not damage the jewellery.
Skin chemistry plays a large part in how silver behaves. People with higher acidity levels, or those who use certain lotions, perfumes or hair products, may see their jewellery darken more quickly. Warm climates and humidity can also speed up tarnish. Some customers notice that only certain pieces react, depending on how and where they are worn. Tarnish is only a surface effect and is easily cleaned.
Sterling silver is suitable for most people and does not contain restricted forms of nickel under UK regulations. It is one of the most widely used metals for earrings and pendants. Most customers wear silver daily without any irritation. If a reaction occurs, it is usually linked to lotions, soap residue or environmental factors rather than the metal itself.
Silver is a softer jewellery metal and will show marks from normal wear. Rings, bangles and bracelets tend to scratch more quickly due to regular contact with surfaces. Pendants and earrings scratch far less because they move freely and rarely rub against anything. Over time the fine marks blend into a natural patina. Deeper marks can be polished by a jeweller if required.
Silver can bend if a chain or bracelet is pulled sharply or catches on something. Fine chains can kink, and lightweight bangles can deform if struck against a hard surface. Heavier chains and bracelets offer more strength but can still break at pressure points such as clasps and joints. These characteristics are normal for silver. Many customers who prefer a stronger feel choose everyday pieces from our silver necklaces range.
Store silver in an airtight pouch or jewellery box away from humidity. Keeping pieces separate helps prevent scratches and tangling. Bathrooms and damp areas should be avoided as they speed up tarnish. A quick wipe with a polishing cloth before storage helps keep seldom worn items brighter for longer.
Light exposure to tap water is fine, such as washing hands or occasional shower use. Silver should not be worn in swimming pools, jacuzzis, hot tubs or other chlorinated water, as chlorine can dull the surface quickly, especially when combined with heat. Sea water can also speed up tarnish. If jewellery does get wet, dry it fully. These reactions do not harm the metal and can be corrected with a polishing cloth. Simple daily items such as silver earrings are often chosen for ease of wear.
Necklaces are the most popular gift choice because they do not require sizing and are easy to wear daily. Heart pendants and simple everyday pieces are common choices for birthdays, anniversaries and special occasions. Rings and bangles can also be given, but sizing needs more care. Many people choose pieces from our silver heart necklaces when buying a meaningful gift.
Sterling silver is a precious metal with a bright white colour, a smooth polish and a familiar feel. It is comfortable to wear, simple to clean and available in a wide range of designs. UK hallmarking provides reassurance of metal quality and authenticity. Many customers select items from our silver jewellery collection when they want a traditional metal suited to everyday wear or special occasions.
Material Information for
Specialist Jewellery Materials
Yes. Many designs from our silver wedding ring range can be made in 9ct or 18ct yellow gold, and some can be made in 9ct or 18ct rose gold. Platinum versions are also available for several designs. Every ring is made to order, hand finished in our workshop and hallmarked in the UK. If you let us know the design, width and finger size, we can provide a full quote.
Yes. We can make platinum versions for a number of the designs shown in our silver wedding ring range. Availability depends on the profile and width. All platinum rings are UK hallmarked and hand finished in our workshop. If you contact us with the design you like, we will confirm the options and prepare a detailed price breakdown.
Most designs are offered in three weights. Narrower widths are usually available in light, medium and heavy. Wider widths are typically available in medium, heavy and extra heavy. These weights change the depth and overall feel of the ring. When quoting, we provide the three available weights with individual prices so you can choose the version that suits you best.
Our meteorite wedding rings use Muonionalusta Meteorite fitted to a solid tantalum liner. The meteorite shows the Widmanstätten pattern created during its cooling in space. The tantalum liner gives comfort, protects the meteorite from moisture and provides strength. Each meteorite section is cut and fitted by hand to keep the natural pattern visible.
Meteorite contains iron and should be kept dry. Remove the ring for swimming pools, hot tubs, saunas, steam and repeated exposure to water. After wear, a dry cloth is usually enough to clean it. Some people use a very small amount of oil on a tissue to give a light protective layer over the surface. Meteorite is a specialist material and may not suit customers who work daily with water or chemicals.
Our superconductor ring is made from a mixed alloy of titanium and niobium set within copper. The material is originally produced for use in high-tech applications such as MRI scanners. When these rods reach the end of their service life, the decommissioned sections can be repurposed for jewellery.
The ring is machined from solid superconductor so the titanium-niobium alloy remains embedded within the copper matrix, creating the distinctive geometric pattern. There is no inner sleeve; the entire ring is superconductor throughout.
The benefits are the unique appearance, the contrasting colours and the scientific origin which makes it popular with customers looking for something unusual.
Yes. We set diamonds by hand into titanium and tantalum rings. Titanium designs usually feature white diamonds graded H/Si. Tantalum designs can feature white diamonds graded G/Vs, and we also offer coloured diamonds in yellow, blue, green and black for our tantalum rings. All stone setting is carried out in our workshop using specialist equipment.
Yes. Our unusual designs include Muonionalusta Meteorite with a tantalum liner, a nebula themed zirconium ring with a colour changing anodised aluminium inlay, our patterned superconductor ring made from copper and niobium, and a selection of darker tantalum rings that remain uncommon in the UK. These can be viewed in our unusual wedding rings for men collection.
Titanium is a practical choice for a medic alert tag. It is light, strong and resistant to corrosion. It suits sensitive skin and does not stain or discolour with normal wear. Titanium engraves with a clear contrasting black finish, which keeps medical information easy to read.
Yes. Our titanium dog tag can be engraved on both sides with up to six lines of text per side. Titanium produces a sharp contrasting black engraving and we can also engrave images such as medic alert symbols or a fingerprint. The dog tag can be supplied with or without a chain, and a suitable chain can be purchased if required.
Yes. We offer titanium chains in 16, 18, 20, 22, 24 and 26 inches. Our most popular style is the Venitian Inca chain, which is light, comfortable and suitable for everyday wear. It can be worn alone or paired with our titanium dog tag.
Yes. We offer one of the widest large-size ranges available. Many of our designs are stocked up to around UK size Z+6, and we also carry a good selection of rings in sizes up to UK size Z+10 across several metals. Larger sizes such as Z+11 and Z+12 are produced less often but are available on certain styles. Widths start at 2mm in metals such as silver and titanium and rise to 10mm in tungsten carbide and 12mm in silver.
